Previous | |
WCTSP-Step
5 |
|
-Optimizing
Horizontal Geometry for Stylus/Cantilever Alignment |
|
5.1 |
|
Picture 5.1: - location of stylus at point "0" | |
5.2-a |
|
5.2-b |
|
Pictures 5.2: antiskating Device should be set for Zero side force (disangaged) | |
5.3 |
|
Picture 5.3: location of stylus at point "0" for Baerwald Alignment | |
5.4 |
|
Picture 5.4: location of stylus at point "1" | |
5.5 |
|
Picture 5.5: location of stylus at point "1"- Overhang is too short | |
5.6 |
|
Picture 5.6: stylus at point "1" with correct Overhang | |
5.7 |
|
Picture 5.7: stylus at point "2" - Null Point (for Baerwald)at 121 mm from center of record | |
5.8 |
|
Picture 5.8 Alignment of stylus/cantilever at point 2 for Loefgren | |
5.9 |
|
Pictures 5.9 location of stylus at point "3"(66mm from center off record ) |
|
5.10 |
|
Picture 5.10 Perfect alignment off stylus/cantilever at point "3" |
|
5.11 |
|
Picture 5.11 | |
5.12 |
|
Picture 5.12 | |
5.13 |
|
Picture 5.13 | |
5.14. | |
Picture 5.14 | |
Previous |